Navigation
EnglishLanguage Switcher

ALPLA Jobs

Quality Inspector

Zamil ALPLA Plastic - Middle East Limited / Al Khobar / Saudi Arabia / Quality

Your responsibilities

Production Line Inspection

  • Conducts in-process inspection of the production line as per the Daily inspection plan (Line) and entering the inspection results in the TIG.
  • Responsible for putting the QC hold or reject sticker on non-conforming products either from in-process inspection, dimensional checks or during spot checks in the warehouse.
  • Verifying the effectiveness of line clearance and give green signal for production to start packing the goods
  • Prepares the daily inspection results in the TIG system
  • Update the line clearance checklist at the machine
  • Maintain the line clearance folder
  • Prepares the shift quality summary report.
  • Update the machine sample box of approved samples at the machine for each changeover (part of line clearance)
  • Maintaining cleanliness and orderliness in their respective areas
  • Sustain 5 S system
  • Conduct additional inspections required (e.g. due to process changes etc.)
  • Following the SOPs as defined by supervisor and manager

Laboratory Activities

  • Conducts product evaluation as per test procedure required by the product/specification and based on daily inspection Plan (Lab.) and entering the data in the TIG (applicable for normal production and also for AQP test samples)
  • Responsible for putting the QC hold or reject sticker on non-conforming products either from in-process inspection, dimensional checks or during spot checks in the warehouse
  • Maintain the in-house calibration for CMM & Magnamike
  • Prepares the daily inspection results in the TIG;
  • Prepares the shift quality summary report.
  • Prepares the Certificate of Analysis
  • Monitor the temp. and humidity inside lab.
  • Update the counter storage samples at samples cabinet (last run samples)
  • Maintaining cleanliness and orderliness in their respective areas.
  • Sustain 5 S
  • Share related reports on a daily basis
  • Check the RIR in ORACLE on a daily basis to check the materials received for inspection and release in system.
  • Check the CRF in ORACLE on a daily basis to check the FG returned for inspection and process it in the system.
  • Collect samples of master batch & packaging material then analyze by comparing with the standard sample.
  • Conducts spot checking of the status of FG & Raw material at warehouse by checking the packaging and storage condition.
  • Conducts spot checking of the Housekeeping system implementation.
  • Inspect the customer returned physically and in ORACLE by processing the CRF (Customer Return Form), and prepare HOLD stickers in advance and submit them to w/h in-charge in order to put the HOLD stickers during offloading.
  • Responsible for hold area e.g. all pallets on hold are tagged, system accuracy,
  • Coordinate with the Quality Supervisor for the result of the test of new materials.
  • Update the good inward inspection report in the ORACLE system
  • Update & maintain the CRF folder
  • Update & maintain the Raw material COA’s folder
  • Prepares the monthly incoming report summary and submit to the Quality Manager
  • Responsible in keeping the counter storage samples of master batches.
  • Conducts sampling inspection of finished goods for verification in case of non-conformance either by internal NCR or customer complaints.
  • Maintaining cleanliness and orderliness in their respective areas.
  • Sustain 5 S
  • To relieve the QCI whenever there is a need and as instructed by the QA/QC supervisor or Quality Manager.
  • To give on the spot orientation to packers/warehouse forklift drivers for the familiarization of the defects that may occur in the products.
  • To report to the QA/QC Supervisor as soon as possible whenever any non-conformance is found.

Your competencies and qualifications

Education/ Professional Qualifications

Candidate must have completed at least the higher diploma.

Experience

Minimum 2 years’ experience in plastic manufacturing as QC Inspector.

Qualifications/ Skills/ Personal Competencies

  • Knowledgeable in using calipers, micrometers, height gages and other measuring instruments.
  • Knowledge in MS office (Excel, Word)
  • Good interaction with the people.

Contact person
Dhuha Al Sedrah, Human Resources

Zamil ALPLA Plastic - Middle East Limited
Dammam 2nd Industrial Area, P.O. Box No. 1748, 31952 Al Khobar, Saudi Arabia
www.alpla.com

Directions apply